How to assemble your Micro Xtreme

How to assemble your Micro Xtreme freestyle scooter

Difficulty: 1/5

You will need: A 5mm Allen Key

Instructions

1. Firstly, check the steering as it should be moveable

2. If steering is too strict, loosen the screw pictured below carefully

3. Handlebar mount: Insert T Bar into the tube and tighten the four clamp screws slightly

4. Check the handlebar: Your front wheel must be perpendicular to the handlebars

5. Tighten the clamp screws sequentially (from the bottom to the top)